Page 247 - 2021 Sierra Catalog

229
18-9912
LASER TACHOMETER & COUNTER
Description: Used to measure and test the number of rotations per minute (RPM) or total number of rotations
or events on any spinning shaft, pulley, wheel, drive belt, fan, or other rotating objects in general, safely, accurately and easily.
• Measures from 2.5 to 99999 RPM. • 0.05% accuracy.
• 2 to 20” measuring range.
• Laser-powered optical system.
• Memory recall functions (minimum & maximum). • Uses 18-9911 Reflective Tape.
18-9910
OXYGEN SENSOR TESTER/SIMULATOR
Description: For testing and diagnostics on any Oxygen Sensor, to quickly determine whether the sensor is defective and needs replacement.
• Signal output shown in real time on LED bar graph.
• Auto detection of common wire misconnections.
• Works with zirconium, titanium & air/fuel ratio sensors. • Comes with hard shell carrying case.
18-9913
SMARTACH (DIESEL AND GASOLINE
ENGINE TACHOMETER)
Description: A tachometer designed for use on any engine equipped with an alternator, and only requires a simple connection to the electrical system (e.g. battery, alternator, cigarette lighter connector) to measure engine RPM.
• Measures from 200 to 9,999 RPM
• 0.05% accuracy.
• Large 41⁄2 digit LCD display.
• Comes with hard shell carrying case.
18-9915
FUEL INJECTOR ANALYZER
Checking the operation of any gasoline or diesel fuel injector. Works on Solenoid, Piezo (Direct Injectors), and Mechanical Injectors for gasoline and diesel engines. Compare readings between injectors with a “candlestick” graph that displays maximum, minimum, and average readings for each injector This is drop impact resistant and comes with a rechargeable Li-ion battery that provides 6+ hours of working time.
• Display injector waveforms in real time
• Detect and display ECM control signals
• Monitor Pintle Valve Motion and Response • Detect and display engine speed
• 3.5" color TFT LCD display
18-9909
PROFESSIONAL DVOM
Description: Offers full auto range features and functionality. Equipped with a 4 digit LCD display with analog bar graph it is capable of measuring AC/DC voltage up to 600 Volt and AC/DC current up to 10 A. Other functions includes tachometer for RPM measurement, dwell, temperature, resistance, frequency, fuel injection test, diode test, continuity check and overload protection.
• State of the art design and styling.
• 4 digit LCD display with analog bar graph.
• AC/DC voltage measurement: up to 600 V.
• AC/DC current measurement: up to 10 A.
• Tachometer function measures 30 to 20000 RPM • Comes with hard shell carrying case.
EC01350
TERMINALS & CONNECTORS W/CRIMP TOOL
30 pc. terminal assortment packed with crimp tool/wire cutter. Attractive 5 compartment clamshell fits neatly in tool box or glove compartment. Handy for emergencies. Perfect for the do-it-yourselfers.
EC09040
DUAL VOLTAGE
CIRCUIT TESTER
Dual bulb tester for testing both 6 and 12 volt circuits. Also can be used to check spark plug wires. This is the most com- monly used tester for troubleshooting auto,
truck, van and boat wiring. Supplied with ground wire and clip. Packed one per card.
18-8960
IGNITION SPARK TESTER
Description: Use to check for igntion spark in up to 4 ignition wires at a time.
18-9802
TIMING LIGHT
Replaces: MercuryMarine91-99379
Description: Checks ignition timing. Powered by two “D” cell batteries, portable.
18-4442
ENGINE ALIGNMENT TOOL
Replaces: MercuryMarine 91-57797A3, 91-57797A2, 91-57797A1, 91-8M0067546,
91-48347, 91-37384
Description: Used to verify
engine alignment on all MC-I, R-MR, Alpha One and Alpha One/Gen II.
18-9849
BEARING PULLER
Replaces: MercuryMarine91-52394 Description: Removes and installs bear-
ings in MC-I, R-MR, Alpha One, Alpha One/Gen II, all Bravo and outboard gear cases.
18-9862
BEARING DRIVER
Replaces:
Mercury Marine 91-87119
Description: Installs driveshaft bearing onto driveshaft.
18-9873
BEARING DRIVER
Replaces:
Mercury Marine 91-813653 Description: Installs u-joint oil seal
into bearing carrier, also used to pilot the puller rod for gear housing
needle bearing installation on Bravo One and Two drive units.
ACCESSORIES — TOOLS & SHOP SUPPLIES